Drying system
       Drying capacity directly affects the rate of production, how to improve the drying speed and drying efficiency is also the hot spot of equipment users and equipment manufacturers.
       Hot air drying has three important factors:Drying temperature, drying time, drying wind speed。
       1、as the drying temperature rises, the drying efficiency will increase rapidly, when the temperature increases to the liquid boiling point temperature above, the drying rate will tend to flatten, this time increasing the drying temperature will waste a lot of energy, but can not improve the drying speed effect; At the same time, the drying temperature also depends on the material deformation temperature and the specific process requirements. 2、 drying time refers to the material through the oven time, the longer the drying time, the more conducive to drying. 3、 drying with the increase of hot air speed, the drying speed of the material is accelerated; The higher the wind speed, the shorter the drying time to meet the requirements. Therefore, under the premise of not affecting the quality of materials, increasing the hot air speed is an effective way to improve the drying speed.

       Cooling system   
       In the industrial production and manufacturing process, people generally use the following cooling methods, respectively:Air cooling, water cooling, heat dissipation Tube and other cooling methods.
       1、according to the characteristics of the material and the characteristics of the production process, choose the most suitable cooling method.  2、under the premise of ensuring the quality of the material, the cooling path is optimized.  3、increase the contact area, extend the cooling time, improve the cooling effect.